What are the advantages of the take out robot

With the rapid development of Industry 4.0, robots are increasingly becoming one of the more popular mechanical equipment in the industry, and the injection robot is usually used for picking up parts. The name take out robot can know that it is a substitute for manual automation. In the machine for taking parts, instead of labor, it can not only reduce physical labor, improve labor, but also improve production efficiency, stabilize product quality, reduce scrap rate, reduce production costs, and enhance the competitiveness of enterprises. In practical applications, it has certain advantages of safety, quality, management and production efficiency. The details of Guangdong Comans  injection robot  manufacturers are as follows:

First, the use of  injection robot has a certain degree of safety

1. It is not necessary to take the product into the mold by hand to avoid the potential safety hazard.

2. Due to the continuous improvement and strictness of the labor law, the use of robots no longer poses the risk of accidental injury to employees.

3, the robot has a mold protection inside the computer, the product does not fall off in the mold will automatically alarm prompt, will not damage the mold.

4. People are less likely to contact the product to avoid burns caused by overheating of the product.

Second, the use of  injection robot has a certain quality

1. If a person takes out the product, the product may be scratched by one hand, and the product may be dirty if the hand is not clean.

2. The personnel need to close the safety door before taking the product, which will cause the life of the molding machine to be shortened or damaged, which will affect the production. The use of robots guarantees injection quality and extends the life of the molding machine.

3. The time for personnel to take the product is not fixed, which will cause the product to shrink and be deformed. If the material tube is too hot, it needs to be re-injected to cause waste of raw materials. At present, the raw material price is high. The robot takes time to fix the product and ensure product quality.

4. If the molding machine is automatically demoulded, the product will be scratched when dropped, and the oil will be stained to produce defective products.

5, using the injection robot to use the conveyor belt, packaging personnel can more than one heart and one strict quality control, will not be distracted by the product or too close to the injection molding machine, too hot and affect the work.

Third, the use of  injection robot  has a certain degree of management

1. People will be fatigued, and the time for the robot to produce the product is fixed. There is no need to rest, especially the effect of hot weather or night shift is more obvious.

2, using the injection molding machine robot to take the product, the injection molding machine can be unattended operation, not afraid of no one or employees leave the worry.

3. It is difficult for the high-tech personnel to operate the injection molding machine. The ordinary biotech technicians are not technically strong and the responsibility is not strong, which makes production and management difficult.

4. Implement one-person-one mechanism (including water cut, cut cloak and packing), equipped with conveyor belt, and one person can watch 4-5 machines, saving a lot of manpower and reducing workers' wages.

5. People get along with each other will always have conflicts and affect production. The use of mechanical decompression reduces labor, and internal conflicts are not caused by too much work pressure, which improves internal unity and company cohesion.

Fourth, the use of  injection robot  has a certain productivity

1. The investment cost is recovered quickly. For the products made by your company, the investment cost can be recovered within half a year.

2. Use robots to improve the company's image and improve the company's competitiveness.

3, the personnel take the product is not fixed, the safety door slow opening and slow closing has a great impact. In addition, people are lazy, emotional, fatigue at night, lack of energy, add water, toilets and other matters, it is estimated that the production efficiency of 24 hours is only 70%. The robot can work without interruption.

4, can control the product, ensure the customer's delivery time, maintain the company's good reputation and improve the competitiveness of the company.

5. If the molding machine uses robots as a whole, each molding machine can save 1/3 or 1/2 of the manual for quality inspection and packaging.

6, upstream manufacturers also want to choose injection molding machine robot injection molding manufacturers, can accurately calculate the daily output and delivery date. The use of  injection robot  can enhance the competitiveness of enterprises, and it is a development trend.

7. If the product is manually taken out for about 1000 molds a day, the robot can be used to increase about 500 molds, that is, the robot is about 1500 molds a day. If the molding machine in the factory is automatically demoulded, sometimes the product needs to be ejector 2-3 times. The prolonged time will affect the production efficiency, and if the product falls, it will cause scratches, oil stains, etc., resulting in defective products.